Challenger SA10 Symmetric 10,000 lb 2-Post Lift

Challenger Lifts

Challenger SA10 10,000 lb 2-Post Lift Symmetric Arms

SKU: SA10

$5,822.63$9,097.87
Save 36% ($3,275.24)
Ships from manufacturer

Symmetric/Asymmetric 2-Post Lift, Turn Column Configuration, 3-Stage Front & 2-Stage Rear Arms, 3HP Motor, Single-Point Mechanical Lock Release, Adjustable Width (142 In. Height)

MFR #: SA10

Challenger SA10 — 10,000 lb 2-Post Lift

The Challenger SA10 is a 10,000 lb capacity ALI-Certified 2-post lift designed for versatile shop configurations. What sets the SA10 apart is its turn-column design, allowing installation in either a symmetric or asymmetric configuration to match the specific service requirements of your shop. With a 3HP power unit delivering a 44-second rise time, adjustable column width, and innovative 3-stage front and 2-stage rear arms reaching 22 3/8 to 59 inches, the SA10 handles a wide range of cars, trucks, vans, and SUVs up to 10,000 lbs. Standard features include premium double telescoping screw pads, padded overhead shutoff system, plated arm restraints and pins for corrosion resistance, and dual integrated rubber door guards to protect vehicle panels.

Dual Configuration: Symmetric or Asymmetric

The SA10's turn-column design allows the columns to be installed in either a symmetric or asymmetric position. In symmetric configuration, the columns provide even weight distribution with an overall width of 10 ft 9 in or 11 ft 3 in and drive-thru clearance of 7 ft 8 3/4 in or 8 ft 2 3/4 in. In asymmetric configuration, the columns rotate to position the vehicle slightly rearward, giving technicians better door-open access with an overall width of 10 ft 11 1/2 in or 11 ft 5 1/2 in. Both configurations share the same 74 7/8 in rise height and 10,000 lb capacity.

Height Extension Option

The standard SA10 stands 11 ft 10 1/2 in tall and requires a minimum 12 ft ceiling height. For shops with taller ceilings servicing higher-profile vehicles, the SA10EH2 2-foot height extension raises the overall height to 13 ft 10 1/2 in, requiring a 14 ft ceiling. The extension uses the same column structure and does not affect lifting capacity or arm reach.

Standard Equipment & Installation Requirements

Every SA10 ships with 3-stage front and 2-stage rear arms (22 3/8 in to 41 1/2 in front, 38 1/4 in to 59 in rear), premium double telescoping screw pads (4 3/4 in to 6 7/8 in), single-point mechanical lock release, stack adapters, padded overhead shutoff system, and dual integrated rubber door guards. Installation requires a dedicated 208-230V single-phase 20A circuit, a minimum service bay of 12 ft high by 14 ft wide by 24 ft deep, and a concrete floor at least 4 inches thick with minimum 3,500 psi compressive strength, reinforced and cured a minimum of 28 days.

Features & Benefits

10,000 lb ALI-Certified Capacity

The SA10 delivers 10,000 lbs of lifting capacity with ALI Certification, independently tested and validated to ANSI/ALI ALCTV safety standards.

  • 10,000 lb total capacity — 2,500 lbs per arm
  • ALI Certified and independently validated for commercial shop use
  • Handles cars, trucks, vans, and SUVs up to 5 tons

Dual Configuration: Symmetric or Asymmetric

The SA10's turn-column design allows installation in either symmetric or asymmetric configuration, adapting to your shop's specific service needs.

  • Symmetric mode: even weight distribution with wider drive-thru clearance
  • Asymmetric mode: vehicle positioned rearward for better door-open access
  • Same 10,000 lb capacity and 74 7/8 in rise height in both configurations

3HP Power Unit with 44-Second Rise

A 3HP single-phase motor drives the SA10 to full rise height in approximately 44 seconds, keeping shop throughput high.

  • 3HP motor — 208-230V, single-phase, 60Hz
  • 74 7/8 in rise height in approximately 44 seconds
  • Hydraulic system operates at 2,850 psi at rated capacity

Adjustable Column Width

The SA10 offers two width settings in each configuration, letting you optimize bay space and drive-thru clearance for your shop layout.

  • Symmetric: 10 ft 9 in or 11 ft 3 in overall width
  • Asymmetric: 10 ft 11 1/2 in or 11 ft 5 1/2 in overall width
  • Two drive-thru clearance options in each mode for flexible bay sizing

Safety Lock System & Certifications

The SA10 features a single-point mechanical lock release with multiple lock positions and meets the highest industry safety standards.

  • Single-point mechanical lock release for safe lowering from any position
  • ALI Certified — independently tested to ANSI/ALI ALCTV standard
  • ETL Listed for electrical safety compliance

2-Foot Height Extension Available

The optional SA10EH2 height extension adds 2 feet of column height for shops with taller ceilings servicing high-profile vehicles.

  • Standard height: 11 ft 10 1/2 in (requires 12 ft ceiling)
  • Extended height: 13 ft 10 1/2 in (requires 14 ft ceiling)
  • Same lifting capacity and arm reach with or without extension

Specifications

Arms3-Stage Front / 2-Stage Rear
Lifting Capacity10,000 lb lbs
Rear Arm Reach38.25"-59"
Ceiling Height Required12' / 14' (with extension)
Colors AvailableRed, Blue, Black
Shipping Weight~1,700-1,900 lbs
Screw Pad Height4.75"-6.875"
Drive-Thru Clearance92.75" / 98.75"
Speed of Rise44s sec
Rise Height74 7/8" "
Front Arm Reach22.375"-59"
Voltage208V-230V, 60Hz, 1Ph
Lift ConfigurationSymmetric/Asymmetric
Motor3HP HP
Overall Width129" / 135"
ALI/ETL CertifiedYes
Product Type2 Post Lifts
Overall Height136.5" / 142.5" in
ControlsSingle-Point Mechanical Lock Release

Before You Buy

Installation Requirements

Minimum 12 ft ceiling height (14 ft with SA10EH2 extension). Requires 208-230V, single-phase, 20A dedicated circuit. Adjustable column width with two settings per configuration. Indoor installation only. Confirm concrete specs against the installation manual before purchase.

Dual Configuration: Symmetric or Asymmetric

The SA10 features a turn-column design that allows installation in either symmetric or asymmetric configuration. Symmetric provides balanced weight distribution and wider drive-thru. Asymmetric positions the vehicle rearward for better door-open access. Both share the same 10,000 lb capacity. Configuration is selected during installation.

Available in 3 Colors

The Challenger SA10 is available in Red, Blue, and Black. Select your preferred color using the color option on this page. Color availability may vary — contact Panther Lift for current lead times.

Free Freight Shipping

Ships free via freight carrier to the continental United States (48 states). Alaska, Hawaii, Puerto Rico, and Guam are excluded from free freight — contact us for a shipping quote to those locations.

Unloading Requirements

This lift ships curbside via freight truck and weighs approximately 1,700-1,900 lbs depending on configuration. You are responsible for offloading at your location. A forklift, tractor with forks, or equivalent heavy equipment must be available on-site at the time of delivery. The carrier will not unload the freight.

Review Product Manuals

Before purchasing, review the official Challenger installation manual and spec sheet for the SA10. These documents contain critical details on concrete requirements, ceiling clearances, electrical specifications, and bay dimensions that must be verified for your shop.

Frequently Asked Questions

The standard SA10 requires a minimum 12-foot ceiling height with an overall height of 11 ft 10 1/2 in. If you add the optional SA10EH2 2-foot height extension, the overall height increases to 13 ft 10 1/2 in, requiring a minimum 14-foot ceiling. Always verify the floor-to-overhead-switch clearance (10 ft 11 1/8 in standard, 12 ft 11 1/8 in with extension) to ensure no obstructions above the lift.
The Challenger SA10 has a total lifting capacity of 10,000 lbs, rated at 2,500 lbs per arm. It is ALI Certified, meaning the capacity has been independently tested and validated to the ANSI/ALI ALCTV safety standard. The SA10 can service cars, trucks, vans, and SUVs up to 5 tons.
The SA10 features a turn-column design that allows the lift to be installed in either symmetric or asymmetric configuration. In symmetric mode, the columns face each other squarely, providing balanced weight distribution and wider drive-thru clearance (7 ft 8 3/4 in or 8 ft 2 3/4 in). In asymmetric mode, the columns are rotated so the vehicle sits slightly rearward, giving technicians better door-open access for interior work — ideal for service shops that frequently work on vehicle interiors or need to open doors fully while the vehicle is raised. Both configurations offer the same 10,000 lb capacity and 74 7/8 in rise height.
The SA10 requires a dedicated 208-230V single-phase 20A circuit at 60Hz. The circuit must be protected by a circuit breaker or time-delay fuse. A dedicated circuit means no other equipment should share the same breaker. Have a licensed electrician verify your shop's electrical panel can support the SA10 before purchase.
The Challenger SA10 is available in Red, Blue, and Black. Use the color selector on the product page to choose your preferred color. Availability may vary — contact Panther Lift for current lead times on specific colors.
Yes. The Challenger SA10 is ALI Certified, meaning it has been independently tested and validated by the Automotive Lift Institute to meet the ANSI/ALI ALCTV safety standard. ALI Certification is the industry gold standard for automotive lift safety and is required by many insurance providers and shop inspection authorities. The SA10 is also ETL Listed for electrical safety compliance.
Challenger recommends a minimum service bay of 12 ft high by 14 ft wide by 24 ft deep for the standard SA10. If installing the 2-foot height extension (SA10EH2), the ceiling height requirement increases to 14 ft. Ensure a minimum of 72 inches (6 ft) clearance from the nearest obstruction or 84 inches (7 ft) to the nearest wall on each side of the lift.
The SA10 has a maximum rise height of 74 7/8 inches (approximately 6 ft 3 in) with a rise time of approximately 44 seconds. The 3HP single-phase motor operates at 208-230V and delivers consistent lift speed at the full 10,000 lb rated capacity.
Yes. The SA10 offers two width settings in each configuration. In symmetric mode, the overall width can be set to either 10 ft 9 in or 11 ft 3 in. In asymmetric mode, the width options are 10 ft 11 1/2 in or 11 ft 5 1/2 in. The width is set during installation and affects the inside column dimension and drive-thru clearance. Choose the setting that best fits your service bay dimensions.
The SA10 requires a concrete floor at least 4 inches thick with a minimum compressive strength of 3,500 psi, steel reinforcement, and a minimum curing period of 28 days. The floor must be level within 3/8 of an inch across the installation area and free from cracks, seams, and expansion joints near the anchor points. No anchor bolt may be placed within 8 inches of any crack, edge, or expansion joint. If your existing slab does not meet these requirements, a dedicated concrete pad can be poured to spec before installation.
Yes. Panther Lift provides professional lift installation services throughout the tri-state area and surrounding regions. Our installation team handles everything from concrete inspection and electrical prep to full lift assembly, hydraulic setup, and final safety testing. Contact us to schedule an installation or to get a quote for your location.
The SA10 requires daily visual checks for loose or broken parts, hydraulic leaks, and adapter wear. Weekly, inspect the synchronizer cables and sheaves for wear and verify cable tension. Monthly, torque all concrete anchor bolts to 80 ft-lbs, visually inspect the concrete floor within 12 inches of each base plate for cracks or spalling, check the overhead shutoff switch operation, and lubricate all four carriage slide tracks with heavy viscous grease. Following this schedule ensures safe, reliable operation and extends the life of the lift.

Downloads & Resources

Certifications