Challenger 44RK40 Rolling Jack Kit

Challenger Lifts

Challenger 44RK40 Fixed Ramp Kit — 96 In. Drive-Through Ramps for 44040, 44050 & 44060 Series

SKU: 44RK40

$14,339.71$19,377.98
Save 26% ($5,038.27)
Ships from manufacturer

96-inch fixed drive-through ramp kit for Challenger 44040, 44050, and 44060 series heavy-duty 4-post lifts. Full 8-foot length provides a safe, shallow approach angle for the heaviest commercial vehicles.

Part #: 44RK40

MFR #: 44RK40

Full-Length Drive-Through for Heavy-Duty 4-Post Lifts

The Challenger 44RK40 is a 96-inch (8-foot) fixed ramp kit designed for the 44040, 44050, and 44060 series heavy-duty 4-post lifts. At this capacity level — 40,000 to 60,000 lbs — the vehicles being serviced are Class 6–8 commercial trucks, refuse vehicles, fire apparatus, and heavy vocational equipment. The full 8-foot ramp length provides a shallow, safe approach angle for these large, heavy vehicles with varying ground clearance.

Fixed Design for Permanent Drive-Through Bays

Unlike the pivoting ramp kits on lighter lifts, the 44RK40 uses a fixed design — the ramps stay in place as a permanent part of the lift installation. This makes sense for dedicated heavy-duty service bays where drive-through operation is standard procedure for every vehicle. The fixed construction handles the extreme loads these lifts carry without the pivot mechanisms needed on lighter applications.

Features & Benefits

96 In. (8 Ft.) Ramp Length

44040 / 44050 / 44060 Fitment

Fixed Construction

Specifications

Product Type4-Post Drive-Thru Ramp Kits

Before You Buy

8 Ft. Ramps

Full-length approach for the largest commercial and vocational vehicles.

Up to 60,000 lb

Matches 44040–44060 heavy-duty lift capacities.

Frequently Asked Questions

The 44RK40 fits Challenger 44040, 44050, and 44060 series heavy-duty 4-post lifts.
At the 40,000–60,000 lb capacity level, fixed construction provides the structural strength needed for heavy Class 6–8 trucks. These bays are typically dedicated drive-through setups where folding ramps aren't needed.
Plan for at least 8 feet of clear floor space on each end of the lift for the ramps plus additional approach distance for large vehicles.
Yes. The 44RK40 is designed for the 44040–44060 series lifts which handle up to 60,000 lbs. The ramps are built to match these extreme load requirements.